GUTA Trailer Tire Pressure Monitoring System, RV TPMS with 12 Sensors, 6 Alert Modes, Signal Booster, Power Saving Display, Long Sensing Distance, for 3 Trailers (T1/T2/T3), for Camper, Motor Homes
[Real Time Monitoring & High Fuel Economy]: GUTA TPMS has a large screen for displaying up to 10 tires’ data in one page, also the display will automatically switch between the front trailer and rear sections. You can view up to 34 tires without press a button. The TPMS handles pressure up to 188 psi and tire temperature up to 185 ℉, specially designed for large vehicle. Maintaining proper tire parameter at all times ensures vehicle safety and helps achieve desired fuel economy[Easy Setup & Sensor Programmed]: In comparison to the traditional inflation program process of the tire pressure monitoring system, the wireless programming process eliminates the requirement to program while installing the TPMS sensors, allowing you to more easily allocate and program the anti-theft sensors before installing the TPMS sensors uniformly. A signal booster can be added extra to boost the signal and overcome distance and electromagnetic interference challenges. Upon pairing, the system seamlessly configures the current pressure as the reference point, allowing for easy setup of alarm thresholds (with an Alarming Range from +25% PSI to -15% PSI of Reference Pressure)[Advanced Technology Alert System]: The alert mode of this GUTA TPMS including high & low tire pressure alert, high temperature alert, fast leak alert, missing sensor signal alert, and low sensor battery alert, to cover each of the parameters you need to be aware of while driving. The TPMS sends visual and audio warning alarms immediately when data deviates the preset safety parameters, allowing you to concentrate on long-distance travel or freight while maintaining driver safety[Power Saving Monotor]: GUTA monitor has a built-in rechargeable internal lithium battery that could use 12~14 days after 4 hours fully charge. The monitor goes into power saving mode if no motion or vibration is detected in 15 minutes to save battery. The sensors send status signals to the monitor on 5 minutes intervals continuously as long as the sensors are under pressure.Sensor battery life is up to 4 years, also the battery CR2032 is replaceable[Professional Customer Service Team]: If you run into trouble that you can't solve, choose to contact our after-sales service team. Friendly Reminder: To ensure reliable performance and safety, we recommend installing the cap sensors on metal valve stems
